EN / BS butt weld 180° return bend (Short radius) is used to connect two pipes by butt welding connection, so to make the pipeline turn 180-degree for changing the fluid flow direction.
Available size
| Size | C (mm) | B (mm) | Ref. No. |
|---|---|---|---|
| 1/2″ / DN15 / 21.3mm | 50 | 36 | NE0501 |
| 3/4″ / DN20 / 26.9mm | 50 | 39 | NE0502 |
| 1″ / DN25 / 33.7mm | 50 | 42 | NE0503 |
| 1-1/4″ / DN32 / 42.4mm | 64 | 53 | NE0504 |
| 1-1/2″ / DN40 / 48.3mm | 76 | 62 | NE0505 |
| 2″ / DN50 / 60.3mm | 102 | 81 | NE0506 |
| 2-1/2″ / DN65 / 76.1mm | 127 | 102 | NE0507 |
| 3″ / DN80 / 88.9mm | 152 | 121 | NE0508 |
| 4″ / DN100 / 114.3mm | 203 | 159 | NE0509 |
| 5″ / DN125 / 139.7mm | 254 | 197 | NE0510 |
| 6″ / DN150 / 165.1 / 168.3mm | 305 | 237 | NE0511 |
| 8″ / DN200 / 219.1mm | 406 | 313 | NE0512 |
| 10″ / DN250 / 273.0mm | 508 | 391 | NE0513 |
| 12″ / DN300 / 323.9mm | 610 | 467 | NE0514 |
| 14″ / DN350 / 355.6mm | 711 | 533 | NE0515 |
| 16″ / DN400 / 406.4mm | 813 | 610 | NE0516 |
| 18″ / DN450 / 457.0mm | 914 | 686 | NE0517 |
| 20″ / DN500 / 508.0mm | 1016 | 762 | NE0518 |
| 24″ / DN600 / 610.0mm | 1220 | 914 | NE0519 |
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
