Unshielded fire alarm cable (FPLR & FPL)

Unshielded fire alarm cable (FPLR & FPL)

Category
  • Certificate: UL Listed
  • Standard: UL 1424 / NEC Article 760
  • Temperature: -20°C to 75°C
  • Voltage: 300 V
  • Compliance: FPLR/CMR/CL3R, flame test UL 1666
    FPL/CM/CMG/CL3, flame test UL 1685 or CSA FT4/IEEE 1202
  • Application: Riser fire alarm wiring, general purpose fire alarm wiring

Product Details

Unshielded fire alarm cable (FPLR & FPL) is UL Listed under the FPLR and FPL categories. It features a simple, cost-effective construction without metallic shielding, making it lightweight and easy to install in standard commercial environments. Ideal for low-interference settings, it offers no protection against electrical noise or crosstalk, so avoid use near high-power equipment or high-interference areas.

Type FPLR cable
Type FPLR power-limited fire alarm riser cable is suitable for vertical runs in shafts or penetrating multiple floors. It features fire-resistant properties that prevent flame propagation between floors. Tested to UL 1424 and UL 1666 (Vertical riser flame propagation).

Type FPL cable
Type FPL power-limited fire alarm cable is suitable for general-purpose use in fire alarm systems. It resists fire spread but may not be installed in risers, ducts, or plenums unless enclosed in conduit. Tested to UL 1424 and UL 1685 (Vertical flame spread and smoke release test).

Available size (Solid conductor)

Size Conductor type Conductor dia. (mm) Conductor sect. (mm2) Max DCR at 20°C, Ω/km Ref. No.
22 AWG x 4C Solid 0.64 x 4C 0.32 59.1 C0201
18 AWG x 2C Solid 1.02 x 2C 0.82 21.4 C0202
18 AWG x 4C Solid 1.02 x 4C 0.82 21.4 C0203
16 AWG x 2C Solid 1.29 x 2C 1.31 13.5 C0204
16 AWG x 4C Solid 1.29 x 4C 1.31 13.5 C0205
14 AWG x 2C Solid 1.63 x 2C 2.08 8.45 C0206
12 AWG x 2C Solid 2.05 x 2C 3.31 5.31 C0207

Available size (Stranded conductor)

Size Conductor type Conductor dia. (mm) Conductor sect. (mm2) Max DCR at 20°C, Ω/km Ref. No.
22 AWG x 4C 7 stranded 0.73 x 4C 0.32, min 55.4 C0211
18 AWG x 2C 7 stranded 1.16 x 2C 0.81, min 21.9 C0212
18 AWG x 4C 7 stranded 1.16 x 4C 0.81, min 21.9 C0213
16 AWG x 2C 7 stranded 1.46 x 2C 1.28, min 13.7 C0214
16 AWG x 4C 7 stranded 1.46 x 4C 1.28, min 13.7 C0215
14 AWG x 2C 7 stranded 1.85 x 2C 2.04, min 8.60 C0216
12 AWG x 2C 7 stranded 2.32 x 2C 3.26, min 5.41 C0217

Ask For A Quick Quote

Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.