Rubber lined split clamp is mainly used with light steel pipe or CPVC pipe, and it is lined by EPDM to reduce noise and vibration as DIN 4109/ISO 3822-1. Two set screws are equipped for quick installation.
Available size (Source 1)
| Pipe size | Hanger Rod Size (RS) | Max recommend load (N) | Ref. No. |
|---|---|---|---|
| 1/2″ / DN15 | 3/8″ / M10 | 1334 | P4401 (UL) |
| 3/4″ / DN20 | 3/8″ / M10 | 1334 | P4402 (UL/FM) |
| 1″ / DN25 | 3/8″ / M10 | 1334 | P4403 (UL/FM) |
| 1-1/4″ / DN32 | 3/8″ / M10 | 1334 | P4404 (UL/FM) |
| 1-1/2″ / DN40 | 3/8″ / M10 | 1334 | P4405 (UL/FM) |
| 2″ / DN50 | 3/8″ / M10 | 1334 | P4406 (UL/FM) |
| 2-1/2″ / DN65 | 3/8″ / M10 | 1512 | P4407 (UL/FM) |
| 3″ / DN80 | 3/8″ / M10 | 1868 | P4408 (UL/FM) |
| 4″ / DN100 | 3/8″ / M10 | 2668 | P4409 (UL/FM) |
| 5″ / DN125 | 1/2″ / M12 | 3558 | P4410 (UL/FM) |
| 6″ / DN150 | 1/2″ / M12 | 4714 | P4411 (UL/FM) |
| 8″ / DN200 | 1/2″ / M12 | 7205 | P4412 (UL/FM) |
| 10″ / DN250 | 5/8″ / M16 | 10408 | P4413 (UL/FM) |
| 12″ / DN300 | 5/8″ / M16 | 14055 | P4414 (UL/FM) |
Note: It is UL listed and FM approved with or without rubber lining.
Available size (Source 2)
| Pipe size | Hanger Rod Size (RS) | Max recommend load (N) | Ref. No. |
|---|---|---|---|
| 1/2″ / DN15 | 3/8″ / M10 | 1200 | P4421 (ISO) |
| 3/4″ / DN20 | 3/8″ / M10 | 1200 | P4422 (ISO) |
| 1″ / DN25 | 3/8″ / M10 | 1300 | P4423 (ISO) |
| 1-1/4″ / DN32 | 3/8″ / M10 | 1300 | P4424 (ISO) |
| 1-1/2″ / DN40 | 3/8″ / M10 | 1300 | P4425 (ISO) |
| 2″ / DN50 | 3/8″ / M10 | 1300 | P4426 (ISO) |
| 2-1/2″ / DN65 | 3/8″ / M10 | 1900 | P4427 (ISO) |
| 3″ / DN80 | 3/8″ / M10 | 1900 | P4428 (ISO) |
| 4″ / DN100 | 3/8″ / M10 | 2300 | P4429 (ISO) |
| 5″ / DN125 | 1/2″ / M12 | 2700 | P4430 (ISO) |
| 6″ / DN150 | 1/2″ / M12 | 2700 | P4431 (ISO) |
| 8″ / DN200 | 1/2″ / M12 | 2990 | P4432 (ISO) |
| 10″ / DN250 | 9/16″ / M14 | 2990 | P4433 (ISO) |
| 12″ / DN300 | 9/16″ / M14 | 2990 | P4434 (ISO) |
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
