EN / BS butt weld cap is used to mount at the pipe end by butt welding connection, so to block the pipeline and form liquid or gas tight seal.
Available size
| Size | H (mm) | Ref. No. |
|---|---|---|
| 1/2″ / DN15 / 21.3mm | 25 | NE1001 |
| 3/4″ / DN20 / 26.9mm | 25 | NE1002 |
| 1″ / DN25 / 33.7mm | 25 | NE1003 |
| 1-1/4″ / DN32 / 42.4mm | 38 | NE1004 |
| 1-1/2″ / DN40 / 48.3mm | 38 | NE1005 |
| 2″ / DN50 / 60.3mm | 38 | NE1006 |
| 2-1/2″ / DN65 / 76.1mm | 38 | NE1007 |
| 3″ / DNE10 / 88.9mm | 51 | NE1008 |
| 4″ / DN100 / 114.3mm | 64 | NE1009 |
| 5″ / DN125 / 139.7mm | 76 | NE1010 |
| 6″ / DN150 / 165.1 / 168.3mm | 89 | NE1011 |
| 8″ / DN200 / 219.1mm | 102 | NE1012 |
| 10″ / DN250 / 273.0mm | 127 | NE1013 |
| 12″ / DN300 / 323.9mm | 152 | NE1014 |
| 14″ / DN350 / 355.6mm | 165 | NE1015 |
| 16″ / DN400 / 406.4mm | 178 | NE1016 |
| 18″ / DN450 / 457.0mm | 203 | NE1017 |
| 20″ / DN500 / 508.0mm | 229 | NE1018 |
| 24″ / DN600 / 610.0mm | 267 | NE1019 |
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
