EN 10219 cold formed welded circular hollow section

Category Welded Steel Pipe

Certificate: CE certified
Standard: EN 10219-1 / EN 10219-2
Length: 6m / 5.8m / 11.8m / 12m / 20ft, etc.
End: Cut nominally square to the axis
Surface: Bare (black) / light oiling / Water-based black paint / FBE / polyester resin powder / Hot-dip galvanized / duplex coating

Download EN 10219 cold formed welded circular hollow section

Product Details

EN 10219 cold formed welded circular hollow section (CHS) from TPMC are manufactured by ERW or SAW without subsequent heat treatment.
Supplied with nominally square-cut ends, they are ready for welding to structures or bolting with end plates. These CHS offer consistent mechanical properties and dimensional accuracy, ideal for load-bearing applications such as frameworks, trusses, columns, and mechanical supports.

Available sizes

Outside diameter	Specified thickness (mm)	Weight (kg/m)	Cross-sectional area (cm2)	Ref. No.
1/2″ / DN15 / 21.3 mm	2.5	1.16	1.48	P1101 (CE)
3/4″ / DN20 / 26.9 mm	2.5	1.50	1.92	P1102 (CE)
1″ / DN25 / 33.7 mm	3.0	2.27	2.89	P1103 (CE)
1-1/4″ / DN32 / 42.4 mm	3.0	2.91	3.71	P1104 (CE)
1-1/2″ / DN40 / 48.3 mm	3.0	3.35	4.27	P1105 (CE)
2″ / DN50 / 60.3 mm	3.0	4.24	5.40	P1106 (CE)
2-1/2″ / DN65 / 76.1 mm	4.0	7.11	9.06	P1107 (CE)
3″ / DN80 / 88.9 mm	4.0	8.38	10.66	P1108 (CE)
4″ / DN100 / 114.3 mm	5.0	13.48	17.16	P1109 (CE)
6″ / DN150 / 168.3 mm	6.0	24.02	30.58	P1110 (CE)
8″ / DN200 / 219.1 mm	8.0	41.65	53.03	P1111 (CE)
10″ / DN250 / 273.0 mm	10.0	64.86	82.58	P1112 (CE)
12″ / DN300 / 323.9 mm	12.0	92.30	117.52	P1113 (CE)
14″ / DN350 / 355.6 mm	12.0	101.68	130.00	P1114 (CE)
16″ / DN400 / 406.4 mm	12.0	116.72	149.00	P1115 (CE)