Horizontal split-case fire pump from TPMC provides reliable, high-capacity water supply for standpipe, sprinkler, and outdoor hydrant systems. Designed for water sources at or above grade, these single-stage, double-suction pumps feature a rugged horizontally split casing that allows rapid access to the impeller, bearings and shaft without disturbing suction/discharge piping or driver alignment — significantly reducing downtime and maintenance costs.
Available sizes (Electric motor drive)
| US system capacity (gpm) | US system pressure (psi) | Metric system capacity (m³/h) | Metric system pressure (bar) | Ref. No. |
|---|---|---|---|---|
| 500 | 40 ~ 400 | 114 | 2.8 ~ 27.6 | U0101 |
| 750 | 40 ~ 380 | 170 | 2.8 ~ 26.2 | U0102 |
| 1000 | 50 ~ 360 | 227 | 3.4 ~ 24.8 | U0103 |
| 1250 | 60 ~ 280 | 284 | 4.1 ~ 19.3 | U0104 |
| 1500 | 50 ~ 240 | 341 | 3.4 ~ 16.5 | U0105 |
| 2000 | 60 ~ 220 | 454 | 4.1 ~ 15.2 | U0106 |
| 2500 | 70 ~ 190 | 568 | 4.8 ~ 13.1 | U0107 |
| 3000 | 80 ~ 180 | 681 | 5.5 ~ 12.4 | U0108 |
| 3500 | 70 ~ 200 | 795 | 4.8 ~ 13.8 | U0109 |
| 4000 | 70 ~ 200 | 908 | 4.8 ~ 13.8 | U0110 |
| 4500 | 70 ~ 180 | 1022 | 4.8 ~ 12.4 | U0111 |
| 5000 | 65 ~ 170 | 1136 | 4.5 ~ 11.7 | U0112 |
Note:
1. The pressure ranges shown represent the available performance envelope at nominal speeds. Actual performance curves and drive power selection are provided upon request for selected duty point. Contact TPMC for details.
2. All ratings comply with NFPA 20 (150% capacity at not less than 65% of rated head; shut-off head not more than 140% of rated head).
Available sizes (Diesel engine drive)
| US system capacity (gpm) | US system pressure (psi) | Metric system capacity (m³/h) | Metric system pressure (bar) | Ref. No. |
|---|---|---|---|---|
| 500 | 40 ~ 340 | 114 | 2.8 ~ 23.4 | U0121 |
| 750 | 40 ~ 330 | 170 | 2.8 ~ 22.8 | U0122 |
| 1000 | 40 ~ 310 | 227 | 2.8 ~ 21.4 | U0123 |
| 1250 | 45 ~ 220 | 284 | 3.1 ~ 15.2 | U0124 |
| 1500 | 40 ~ 260 | 341 | 2.8 ~ 17.9 | U0125 |
| 2000 | 60 ~ 260 | 454 | 4.1 ~ 17.9 | U0126 |
| 2500 | 70 ~ 200 | 568 | 4.8 ~ 13.8 | U0127 |
| 3000 | 80 ~ 180 | 681 | 5.5 ~ 12.4 | U0128 |
| 3500 | 70 ~ 180 | 795 | 4.8 ~ 12.4 | U0129 |
| 4000 | 70 ~ 180 | 908 | 4.8 ~ 12.4 | U0130 |
| 4500 | 70 ~ 170 | 1022 | 4.8 ~ 11.7 | U0131 |
| 5000 | 65 ~ 160 | 1136 | 4.5 ~ 11.0 | U0132 |
Note:
1. The pressure ranges shown represent the available performance envelope at nominal speeds. Actual performance curves and drive power selection are provided upon request for selected duty point. Contact TPMC for details.
2. All ratings comply with NFPA 20 (150% capacity at not less than 65% of rated head; shut-off head not more than 140% of rated head).
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
