Steel EMT (electrical metallic tubing) elbow is made from the same material of straight EMT conduit, and it changes the direction of the tubing for 90 or 45 degree. Both the outside and inside surfaces are galvanized for corrosion resistance.
Available size
Trade size | OD (mm) | Thickness (mm) | Degree | Ref. No. |
---|---|---|---|---|
1/2″ | 17.93 | 1.07 | 90° / 45° | C1201 |
3/4″ | 23.42 | 1.24 | 90° / 45° | C1202 |
1″ | 29.54 | 1.45 | 90° / 45° | C1203 |
1-1/4″ | 38.35 | 1.65 | 90° / 45° | C1204 |
1-1/2″ | 44.20 | 1.65 | 90° / 45° | C1205 |
2″ | 55.80 | 1.65 | 90° / 45° | C1206 |
2-1/2″ | 73.03 | 1.83 | 90° / 45° | C1207 |
3″ | 88.9 | 1.83 | 90° / 45° | C1208 |
4″ | 114.30 | 2.11 | 90° / 45° | C1209 |
Note:
1. The dimension tolerance follows the specification of straight EMT conduit.
2. No elbow shall be sharper than 90°, and angle tolerance is ± 2°.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.