Double jacket fire hose from TPMC is a heavy-duty attack hose for high-rise standpipes, supply lines, and structural fire attack. An outer jacket woven over an inner structural jacket delivers superior kink resistance, extreme abrasion protection, and higher pressure ratings than single jacket hoses. This rugged yet flexible construction enables firefighters to maneuver in tight spaces and maintain steady flow under demanding conditions.
Available size (Source 1 with UL or FM)
| Size | Lining | Service pressure (psi) | Ref. No. |
|---|---|---|---|
| 1-1/2″ | EPDM | 300 | F4201 (UL) |
| 2-1/2″ | EPDM | 300 | F4202 (UL) |
| 1-1/2″ | EPDM | 400 | F4203 (UL) |
| 1-3/4″ | EPDM | 400 | F4204 (UL) |
| 2″ | EPDM | 400 | F4205 (UL) |
| 2-1/2″ | EPDM | 400 | F4206 (UL) |
| 3″ | EPDM | 400 | F4207 (UL) |
| 1-1/2″ | TPU | 400 | F4208 (UL) |
| 1-3/4″ | TPU | 400 | F4209 (UL) |
| 3″ | TPU | 400 | F4210 (UL) |
| 1-1/2″ | EPDM | 400 | F4211 (FM) |
| 1-3/4″ | EPDM | 400 | F4212 (FM) |
| 2″ | EPDM | 400 | F4213 (FM) |
| 2-1/2″ | EPDM | 400 | F4214 (FM) |
Note:
1. The couplings are pre-assembled on both ends of fire hose through expansion rings.
2. For F4201 to F4210, please refer to UL certificate (Cert No EX27792) as our TPMC brand.
Available size (Source 2 with UL or FM)
| Size | Lining | Service pressure (psi) | Ref. No. |
|---|---|---|---|
| 2-1/2″ | EPDM | 400 | F4221 (UL) |
| 1-1/2″ | EPDM | 400 | F4222 (FM) |
| 1-3/4″ | EPDM | 400 | F4223 (FM) |
| 2-1/2″ | EPDM | 400 | F4224 (FM) |
| 1-1/2″ | TPU | 400 | F4225 (FM) |
| 1-3/4″ | TPU | 400 | F4226 (FM) |
| 2-1/2″ | TPU | 400 | F4227 (FM) |
Note: The couplings are pre-assembled on both ends of fire hose through expansion rings.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
