Combination conduit body (LL Type) for EMT and RMC/IMC works with Electrical Metallic Tubing (EMT), Rigid Metal Conduit (RMC), and Intermediate Metal Conduit (IMC). It facilitates wire pulling, provides access for splicing and maintenance, and enables 90° direction changes. Featuring set screw and threaded hubs on both ends with a removable bolted cover, the LL configuration has an inlet at the bottom and a left-side outlet.
Available size
| Trade size | Material | Type | Connection | Ref. No. |
|---|---|---|---|---|
| 1/2″ | Aluminum | LL | Comb thread and set screw | C5821 (UL) |
| 3/4″ | Aluminum | LL | Comb thread and set screw | C5822 (UL) |
| 1″ | Aluminum | LL | Comb thread and set screw | C5823 (UL) |
| 1-1/4″ | Aluminum | LL | Comb thread and set screw | C5824 (UL) |
| 1-1/2″ | Aluminum | LL | Comb thread and set screw | C5825 (UL) |
| 2″ | Aluminum | LL | Comb thread and set screw | C5826 (UL) |
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
