EN / BS butt weld 90° reducing elbow (Long radius) is used to connect two pipes by butt welding connection, so to make the pipeline turn 90-degree for changing the fluid flow direction and reducing the flow path from a larger inlet to a smaller outlet.
Available size
| Size | A (mm) | Ref. No. |
|---|---|---|
| 2″ x 1-1/2″ / DN50 x DN40 / 60.3mm x 48.3mm | 76 | NE1101 |
| 2″ x 1-1/4″ / DN50 x DN32 / 60.3mm x 42.4mm | 76 | NE1102 |
| 2″x 1″ / DN50 x DN25 / 60.3mm x 33.7mm | 76 | NE1103 |
| 2-1/2″ x 2″ / DN65 x DN50 / 76.1mm x 60.3mm | 95 | NE1104 |
| 2-1/2″ x 1-1/2″ / DN65 x DN40 / 76.1mm x 48.3mm | 95 | NE1105 |
| 2-1/2″ x 1-1/4″ / DN65 x DN32 / 76.1mm x 42.2mm | 95 | NE1106 |
| 3″ x 2-1/2″ / DN80 x DN65 / 88.9mm x 76.1mm | 114 | NE1107 |
| 3″ x 2″ / DN80 x DN50 / 88.9mm x 60.3mm | 114 | NE1108 |
| 3″ x 1-1/2″ / DN80 x DN40 / 88.9mm x 48.3mm | 114 | NE1109 |
| 4″ x 3″ / DN100 x DN80 / 114.3mm x 88.9mm | 152 | NE1110 |
| 4″ x 2-1/2″ / DN100 x DN65 / 114.3mm x 76.1mm | 142 | NE1111 |
| 4″ x 2″ / DN100 x DN50 / 114.3mm x 60.3mm | 142 | NE1112 |
| 5″ x 4″ / DN125 x DN100 / 141.3mm x 114.3mm | 190 | NE1113 |
| 5″ x 3″ / DN125 x DN80 / 141.3mm x 88.9mm | 190 | NE1114 |
| 5″ x 2-1/2″ / DN125 x DN65 / 141.3mm x 76.1mm | 190 | NE1115 |
Note:
1. The thickness of above form refers to large end OD, and thickness of small end OD is different.
2. For size DN 150, it is also available with 165.1 mm as per EN 10255.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
