Swinging arm fire hose reel (Manual) is normally installed in a building for the occupants to extinguish a small fire. It could swing over 170°. For manual type, it is controlled by an external manual valve to release water into the hose.
Available size
| Size | Nozzle material | Overall size H x W x D (mm) | Ref. No. |
|---|---|---|---|
| 3/4″ x 30 | Nylon | 555 x 650 x 210 | FE6201 (LPCB) |
| 3/4″ x 30 | Brass | 555 x 650 x 210 | FE6202 (LPCB) |
| 1″ x 30 | Nylon | 600 x 650 x 210 | FE6203 (LPCB) |
| 1″ x 30 | Brass | 600 x 650 x 210 | FE6204 (LPCB) |
| 1-1/4″ x 30 | Brass | 650 x 565 x 420 | FE6205 (LPCB) |
| 3/4″ x 45 | Nylon | 555 x 650 x 240 | FE6206 (ISO) |
| 3/4″ x 45 | Brass | 555 x 650 x 240 | FE6207 (ISO) |
| 1″ x 45 | Nylon | 600 x 650 x 260 | FE6208 (ISO) |
| 1″ x 45 | Brass | 600 x 650 x 260 | FE6209 (ISO) |
Note:
1. It is wall mounted or cabinet mounted, available left or right hand. For size 1-1/4″ hose reel, only wall mounted is available.
2. The L shaped swinging arm bracket is pre-assembled, see FE7001.
3. If it is wall mounted, an extra U shaped wall mounting bracket is needed, see FE7011.
4. It is also available to add a pressure gauge, which can be located in the middle of the disc or at the inlet of stop valve.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
