Rubber lined light duty clevis hanger from TPMC features a two-part assembly with a formed U-strap supporting the pipe from beneath and an upper yoke secured by a cross bolt. The inner surface of the U-strap is lined with rubber to provide a protective cushion between the hanger and the pipe, which helps prevent surface damage to the pipe and reduces noise and vibration transmission.
This light duty clevis hanger is ideal for suspending non-insulated stationary horizontal steel piping in fire protection, HVAC, chilled water systems, and other applications requiring vibration isolation or surface protection.
Available sizes
| Pipe size | Rod size (RS, imperial) | Rod size (RS, metric) | Max rec. load (lbs) | Ref. No. |
|---|---|---|---|---|
| 1/2″ / DN15 | 3/8″ | M10 | 150 | P4301 (ISO) |
| 3/4″ / DN20 | 3/8″ | M10 | 150 | P4302 (ISO) |
| 1″ / DN25 | 3/8″ | M10 | 250 | P4303 (ISO) |
| 1-1/4″ / DN32 | 3/8″ | M10 | 250 | P4304 (ISO) |
| 1-1/2″ / DN40 | 3/8″ | M10 | 250 | P4305 (ISO) |
| 2″ / DN50 | 3/8″ | M10 | 250 | P4306 (ISO) |
| 2-1/2″ / DN65 | 1/2″ | M12 | 350 | P4307 (ISO) |
| 3″ / DN80 | 1/2″ | M12 | 350 | P4308 (ISO) |
| 4″ / DN100 | 1/2″ | M12 | 400 | P4309 (ISO) |
Note: Load ratings are calculated with a minimum safety factor of 5:1 and apply at normal ambient temperatures. Values are based on the lesser of hanger rod tensile strength and clevis assembly capacity. For critical applications, consult project engineering specifications.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
