Light duty clevis hanger from TPMC features a two-part assembly with a formed U-strap supporting the pipe from beneath and an upper yoke secured by a cross bolt. The design provides reliable load capacity, rigidity, and easy vertical adjustment via the hanger rod connection, while reducing rod bending by allowing limited horizontal swing along the pipe axis.
UL Listed, this light duty clevis hanger is ideal for suspending non-insulated stationary horizontal steel or CPVC piping in branch lines and smaller main lines of fire sprinkler systems.
Available sizes (Plain edge)
| Pipe size | Rod size (RS, imperial) | Rod size (RS, metric) | Max rec. load (lbs) | Ref. No. |
|---|---|---|---|---|
| 1/2″ / DN15 | 3/8″ | M10 | 150 | P4201 (UL) |
| 3/4″ / DN20 | 3/8″ | M10 | 250 | P4202 (UL) |
| 1″ / DN25 | 3/8″ | M10 | 250 | P4203 (UL) |
| 1-1/4″ / DN32 | 3/8″ | M10 | 250 | P4204 (UL) |
| 1-1/2″ / DN40 | 3/8″ | M10 | 250 | P4205 (UL) |
| 2″ / DN50 | 3/8″ | M10 | 250 | P4206 (UL) |
| 2-1/2″ / DN65 | 1/2″ | M12 | 350 | P4207 (UL) |
| 3″ / DN80 | 1/2″ | M12 | 350 | P4208 (UL) |
| 4″ / DN100 | 1/2″ or 5/8″ | M12 or M16 | 400 | P4209 (UL) |
Note: Load ratings are calculated with a minimum safety factor of 5:1 and apply at normal ambient temperatures. Values are based on the lesser of hanger rod tensile strength and clevis assembly capacity. For critical applications, consult project engineering specifications.
Available sizes (Flared edge)
| Pipe size | Rod size (RS, imperial) | Rod size (RS, metric) | Max rec. load (lbs) | Ref. No. |
|---|---|---|---|---|
| 1/2″ / DN15 | 3/8″ | M10 | 150 | P4221 (UL) |
| 3/4″ / DN20 | 3/8″ | M10 | 150 | P4222 (UL) |
| 1″ / DN25 | 3/8″ | M10 | 250 | P4223 (UL) |
| 1-1/4″ / DN32 | 3/8″ | M10 | 250 | P4224 (UL) |
| 1-1/2″ / DN40 | 3/8″ | M10 | 250 | P4225 (UL) |
| 2″ / DN50 | 3/8″ | M10 | 250 | P4226 (UL) |
| 2-1/2″ / DN65 | 1/2″ | M12 | 350 | P4227 (UL) |
| 3″ / DN80 | 1/2″ | M12 | 350 | P4228 (UL) |
| 4″ / DN100 | 5/8″ | M16 | 500 | P4229 (UL) |
Note: Load ratings are calculated with a minimum safety factor of 5:1 and apply at normal ambient temperatures. Values are based on the lesser of hanger rod tensile strength and clevis assembly capacity. For critical applications, consult project engineering specifications.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
