Search
Close this search box.

K8.0 dry quick response pendent sprinkler

K8.0 dry quick response pendent sprinkler

Category
  • Certificate: UL Listed / FM Approved
  • Standard: UL 199, NFPA 13
  • Feature: K8.0 (K115), dry, pendent
  • W. pressure: 175 psi
  • T. pressure: 500 psi, factory hydrostatic test
  • O. pressure: Min 7 psi
  • Surface: Rough brass / chromed (Sprinkler), Signal white / chromed (Escutcheon)

Product Details

K8.0 dry quick response pendent sprinkler is mainly used to protect areas subject to freezing temperatures. The sprinkler is secured in an extension nipple that has a seal at the inlet end to prevent water from entering the nipple until the sprinkler operates.

Available size

Type Temperature rating Order length (A) Working pressure (psi) Ref. No.
Dry pendent 135°F (57°C) 5-1/4″ to 48″ 175 S5701 (UL/FM)
Dry pendent 155°F (68°C) 5-1/4″ to 48″ 175 S5702 (UL/FM)
Dry pendent 175°F (79°C) 5-1/4″ to 48″ 175 S5703 (UL/FM)
Dry pendent 200°F (93°C) 5-1/4″ to 48″ 175 S5704 (UL/FM)
Dry pendent 286°F (141°C) 5-1/4″ to 48″ 175 S5705 (UL/FM)
Dry recessed pendent 135°F (57°C) 3-3/4″ to 48″ 175 S5706 (UL/FM)
Dry recessed pendent 155°F (68°C) 3-3/4″ to 48″ 175 S5707 (UL/FM)
Dry recessed pendent 175°F (79°C) 3-3/4″ to 48″ 175 S5708 (UL/FM)
Dry recessed pendent 200°F (93°C) 3-3/4″ to 48″ 175 S5709 (UL/FM)
Dry recessed pendent 286°F (141°C) 3-3/4″ to 48″ 175 S5710 (UL)

Note:
1. Dry sprinklers are furnished based on Order length (A) as measured per drawing. After the measurement is taken, round it to the nearest 1/4″ increment.
2. It is available with other mounting type, such as flush, sleeve & skirt, extended sleeve & skirt (deep), etc.

Ask For A Quick Quote

Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.