Hanger rod (Threaded rod / All threaded rod) is a round steel bar with machined threads on its full length or partial length. It is used to connect other components to make up a pipe hanger assembly.
Available size (Inch / imperial)
Rod size (RS) | Thread | Length (feet) | Ref. No. |
---|---|---|---|
1/4″ | 20 UNC | 3 ~ 18 | P7301 |
5/16″ | 18 UNC | 3 ~ 18 | P7302 |
3/8″ | 16 UNC | 3 ~ 18 | P7303 |
1/2″ | 13 UNC | 3 ~ 18 | P7304 |
5/8″ | 11 UNC | 3 ~ 18 | P7305 |
3/4″ | 10 UNC | 3 ~ 18 | P7306 |
7/8″ | 9 UNC | 3 ~ 18 | P7307 |
1″ | 8 UNC | 3 ~ 18 | P7308 |
1-1/8″ | 7 UNC | 3 ~ 18 | P7309 |
1-1/4″ | 7 UNC | 3 ~ 18 | P7310 |
Note:
1. The load is based on max 340℃ (650°F).
2. The galvanized surface is only available with length up to 12 ft. For length over 12 ft, it is supplied with oiled surface.
Available size (Metric)
Rod size (RS) | Thread | Length (mm) | Ref. No. |
---|---|---|---|
M6 | Coarse | 1000 ~ 6000 | P7321 |
M8 | Coarse | 1000 ~ 6000 | P7322 |
M10 | Coarse | 1000 ~ 6000 | P7323 |
M12 | Coarse | 1000 ~ 6000 | P7324 |
M16 | Coarse | 1000 ~ 6000 | P7325 |
M20 | Coarse | 1000 ~ 6000 | P7326 |
M22 | Coarse | 1000 ~ 6000 | P7327 |
M24 | Coarse | 1000 ~ 6000 | P7328 |
M27 | Coarse | 1000 ~ 6000 | P7329 |
M30 | Coarse | 1000 ~ 6000 | P7330 |
Note:
1. The load is based on max 340℃ (650°F).
2. The galvanized surface is only available with length up to 4m. For length over 4m, it is supplied with oiled surface.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.