Universal beam clamp from TPMC is a versatile pipe hanger component designed to attach securely to the top or bottom flange of I‑beams or wide‑flange beams without welding or drilling. It accepts a threaded hanger rod that passes through the clamp to support sprinkler piping, standpipe systems, conduit, cable trays, and other suspended mechanical services.
UL Listed and FM Approved, this clamp is suitable for fire protection systems, including sprinkler mains and standpipe risers, where reliable, heavy‑duty support is critical.
Available sizes
| Rod size (RS, imperial) | Rod size (RS, metric) | Max rec. load (lbs, top) | Max rec. load (lbs, bottom) | Ref. No. |
|---|---|---|---|---|
| 3/8″ | M10 | 500 | 250 | P6101 (UL/FM) |
| 1/2″ | M12 | 950 | 760 | P6102 (UL/FM) |
Note:
1. Set screw must be tightened onto the sloped side of the beam flange. Follow recommended torque values per MSS SP-69.
2. Maximum recommended loads are based on normal ambient temperatures and include a minimum safety factor of 5:1 per MSS SP-58.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
