Ceiling flange from TPMC is a structural attachment designed to secure hanger rods to wood beams, concrete ceilings, or walls. It features a center threaded bore to accept threaded hanger rod and multiple mounting holes for fastening with wood screws, nails, or concrete anchors. This design effectively distributes the load and provides a rigid, reliable anchor point.
UL Listed and FM Approved, the ceiling flange is ideal for both vertical and horizontal installations in mechanical, plumbing, and fire protection systems where direct attachment to wood, concrete, or similar substrates is required.
Available sizes
| Rod size (RS, imperial) | Rod size (RS, metric) | Mounting hole | Max rec. load (lbs) | Ref. No. |
|---|---|---|---|---|
| 3/8″ | M10 | 5/16″ (2 holes) | 180 | P6901 (UL/FM) |
| 1/2″ | M12 | 5/16″ (2 holes) | 180 | P6902 (UL) |
Note:
1. Use appropriate wood screws, lag screws, or concrete anchors through the mounting holes.
2. Maximum recommended loads are based on normal ambient temperatures and include a minimum safety factor of 5:1 per MSS SP-58.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
