Adjustable center-load beam clamp with extension piece is designed to suspend a threaded hanger rod from the center of an I-beam or wide-flange beam. The adjustable mouth accommodates beam flange widths from 3″ to 7″, while the tie rod securely locks the clamp in place when the nuts are tightened. The integrated extension piece provides additional vertical adjustment below the beam.
This design ensures the load is distributed equally on both sides of the beam, offering stable and balanced support for sprinkler piping, standpipe systems, conduit, cable trays, and other suspended mechanical services.
Available sizes
| Rod size (RS, imperial) | Rod size (RS, metric) | Extension piece | Max rec. load (lbs) | Ref. No. |
|---|---|---|---|---|
| 3/8″ | M10 | Included | 730 | P6701 (ISO) |
| 1/2″ | M12 | Included | 1350 | P6702 (ISO) |
| 5/8″ | M16 | Included | 1365 | P6703 (ISO) |
| 3/4″ | M20 | Included | 1365 | P6704 (ISO) |
| 7/8″ | M22 | Included | 1365 | P6705 (ISO) |
Note: Maximum recommended loads are based on normal ambient temperatures and include a minimum safety factor of 5:1 per MSS SP-58.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
