Hinged split pipe clamp (Hinged split ring hanger) from TPMC is a hinged two-piece ring designed for suspension of light duty, non-insulated stationary piping. It opens on a hinge to quickly wrap around the pipe without disassembling the run and closes with a single bolt. An integrated top nut accepts a threaded hanger rod, allowing installation close to ceilings for horizontal runs or close to walls for vertical runs.
This clamp is ideal for light duty applications in fire protection, HVAC, and mechanical systems where space is limited.
Available sizes
| Pipe size | Rod size (RS, imperial) | Rod size (RS, metric) | Max rec. load (lbs) | Ref. No. |
|---|---|---|---|---|
| 1/2″ / DN15 | 3/8″ | M10 | 180 | P5301 (ISO) |
| 3/4″ / DN20 | 3/8″ | M10 | 180 | P5302 (ISO) |
| 1″ / DN25 | 3/8″ | M10 | 180 | P5303 (ISO) |
| 1-1/4″ / DN32 | 3/8″ | M10 | 180 | P5304 (ISO) |
| 1-1/2″ / DN40 | 3/8″ | M10 | 180 | P5305 (ISO) |
| 2″ / DN50 | 3/8″ | M10 | 180 | P5306 (ISO) |
| 2-1/2″ / DN65 | 1/2″ | M12 | 300 | P5307 (ISO) |
| 3″ / DN80 | 1/2″ | M12 | 300 | P5308 (ISO) |
| 4″ / DN100 | 1/2″ | M12 | 300 | P5309 (ISO) |
Note:
1. Load ratings are calculated with a minimum safety factor of 5:1 and apply at normal ambient temperatures. Values are based on the lesser of hanger rod tensile strength and pipe clamp capacity. For critical applications, consult project engineering specifications.
2. Supplied as a complete set, including the clamp and 1 bolt.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
