Adjustable J-hanger from TPMC is a light duty pipe support shaped like the letter “J”, featuring a vertical leg and curved bottom hook that supports the pipe from beneath. Its open design allows easy installation either before or after pipe placement. The integrated side bolt with T-slot enables the bolt to be installed or tightened after pipe placement for added security. A side mounting hole also permits optional wall attachment.
FM Approved, this hanger is ideal for the suspension of non-insulated or insulated stationary horizontal piping in light duty commercial and industrial applications.
Available sizes
| Pipe size | Rod size (RS, imperial) | Rod size (RS, metric) | Max rec. load (lbs) | Ref. No. |
|---|---|---|---|---|
| 3/4″ / DN20 | 3/8″ | M10 | 300 | P4702 (FM) |
| 1″ / DN25 | 3/8″ | M10 | 300 | P4703 (FM) |
| 1-1/4″ / DN32 | 3/8″ | M10 | 300 | P4704 (FM) |
| 1-1/2″ / DN40 | 3/8″ | M10 | 300 | P4705 (FM) |
| 2″ / DN50 | 3/8″ | M10 | 300 | P4706 (FM) |
| 2-1/2″ / DN65 | 3/8″ | M10 | 340 | P4707 (FM) |
| 3″ / DN80 | 3/8″ | M10 | 420 | P4708 (FM) |
| 4″ / DN100 | 3/8″ | M10 | 600 | P4709 (FM) |
| 5″ / DN125 | 1/2″ | M12 | 800 | P4710 (FM) |
| 6″ / DN150 | 1/2″ | M12 | 1060 | P4711 (FM) |
| 8″ / DN200 | 1/2″ | M12 | 1620 | P4712 (FM) |
| 10″ / DN250 | 5/8″ | M16 | 2340 | P4713 (FM) |
| 12″ / DN300 | 5/8″ | M16 | 3160 | P4714 (FM) |
Note:
1. Load ratings are calculated with a minimum safety factor of 5:1 and apply at normal ambient temperatures. Values are based on the lesser of hanger rod tensile strength and J-hanger body capacity. For critical applications, consult project engineering specifications.
2. For insulated piping, use with appropriate pipe shields.
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
