Threaded conduit body (T Type) for RMC/IMC works with Rigid Metal Conduit (RMC) and Intermediate Metal Conduit (IMC). It facilitates wire pulling, provides access for splicing and maintenance, and allows branching in three directions. Featuring threaded hubs on all three ends and a removable bolted cover, the T configuration has a straight through-run with a branch outlet on the side (flank) of the cover.
Available size
| Trade size | Material | Type | Connection | Ref. No. |
|---|---|---|---|---|
| 1/2″ | AL / malleable iron | T | Thread on all 3 ends | C5681 (UL) |
| 3/4″ | AL / malleable iron | T | Thread on all 3 ends | C5682 (UL) |
| 1″ | AL / malleable iron | T | Thread on all 3 ends | C5683 (UL) |
| 1-1/4″ | AL / malleable iron | T | Thread on all 3 ends | C5684 (UL) |
| 1-1/2″ | AL / malleable iron | T | Thread on all 3 ends | C5685 (UL) |
| 2″ | AL / malleable iron | T | Thread on all 3 ends | C5686 (UL) |
| 2-1/2″ | AL / malleable iron | T | Thread on all 3 ends | C5687 (UL) |
| 3″ | AL / malleable iron | T | Thread on all 3 ends | C5688 (UL) |
| 4″ | AL / malleable iron | T | Thread on all 3 ends | C5689 (UL) |
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
