Threaded conduit body (LR Type) for RMC/IMC works with Rigid Metal Conduit (RMC) and Intermediate Metal Conduit (IMC). It facilitates wire pulling, provides access for splicing and maintenance, and enables 90° direction changes. Featuring threaded hubs on both ends and a removable bolted cover, the LR configuration has an inlet at the bottom and a right-side outlet.
Available size
| Trade size | Material | Type | Connection | Ref. No. |
|---|---|---|---|---|
| 1/2″ | AL / malleable iron | LR | Thread + thread | C5641 (UL) |
| 3/4″ | AL / malleable iron | LR | Thread + thread | C5642 (UL) |
| 1″ | AL / malleable iron | LR | Thread + thread | C5643 (UL) |
| 1-1/4″ | AL / malleable iron | LR | Thread + thread | C5644 (UL) |
| 1-1/2″ | AL / malleable iron | LR | Thread + thread | C5645 (UL) |
| 2″ | AL / malleable iron | LR | Thread + thread | C5646 (UL) |
| 2-1/2″ | AL / malleable iron | LR | Thread + thread | C5647 (UL) |
| 3″ | AL / malleable iron | LR | Thread + thread | C5648 (UL) |
| 4″ | AL / malleable iron | LR | Thread + thread | C5649 (UL) |
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
