Threaded conduit body (LL Type) for RMC/IMC works with Rigid Metal Conduit (RMC) and Intermediate Metal Conduit (IMC). It facilitates wire pulling, provides access for splicing and maintenance, and enables 90° direction changes. Featuring threaded hubs on both ends and a removable bolted cover, the LL configuration has an inlet at the bottom and a left-side outlet.
Available size
| Trade size | Material | Type | Connection | Ref. No. |
|---|---|---|---|---|
| 1/2″ | AL / malleable iron | LL | Thread + thread | C5621 (UL) |
| 3/4″ | AL / malleable iron | LL | Thread + thread | C5622 (UL) |
| 1″ | AL / malleable iron | LL | Thread + thread | C5623 (UL) |
| 1-1/4″ | AL / malleable iron | LL | Thread + thread | C5624 (UL) |
| 1-1/2″ | AL / malleable iron | LL | Thread + thread | C5625 (UL) |
| 2″ | AL / malleable iron | LL | Thread + thread | C5626 (UL) |
| 2-1/2″ | AL / malleable iron | LL | Thread + thread | C5627 (UL) |
| 3″ | AL / malleable iron | LL | Thread + thread | C5628 (UL) |
| 4″ | AL / malleable iron | LL | Thread + thread | C5629 (UL) |
Email us at info@tpmcsteel.com or use the form below. Normally you will be replied within 2 hours during support hours.
